Embedded Files
112上學期成果影片.mp4
Mission Description
Score a Basket
Roll the ball onto the court , Earns 10 points.
Putting the ball into the hoop , Earns 25 points.
Fit the cone
Place the cones onto the stand , Earns 20 points.
Placing the cone on the second tier , Earns 25 points.
Placing the cone on the third tier , Earns 30 points.
Stack the blocks
Stack two layers , Earns 20 points.
Stack three layers , Earns a total of 50 points.
Stack four layers , Earns a total of 100 points.
Loop the hoop
Loop the hoop over the tree , Earns 25 points.
Flip the cards
Turn over the cards from 'X' to 'O' , Earns 15 points.
- For completing more than two challenges, score an additional 30 points for each -
STEP.1
Welding TT motors x 4
Recommended wire length is at least 10cm.
Tightly secure the wires using cable ties.
STEP.2
Solder the power cable
The power supply needs to distinguish between positive and negative poles. Pay attention to the wire colors.
Wrap with insulating tape, ensuring each wire is separately insulated
STEP.3
Solder the motors to the receiver board.
STEP.4
Pair the remote controller and
test motors M1 to M4.
Quiz 01
Why shouldn't the wires be separated more than 0.5 centimeters?
Why do we need to touch the place we want to solder with the soldering iron first?
What shape should the solder be between the pin and the copper foil?
STEP.5
Attach the motor to the wheels x2
Fit the motor with the wooden flange coupler x2
Quiz 02
In general, what color wires are typically used for the VCC and GND pins?
Why is it important to follow the standard wire color conventions when wiring?
How can we avoid pulling on the wires?
※Suggested List of Materials to Prepare
Please prepare the relevant materials according to your own design drawing.
Quiz 03
What is the function of the rubber band in the example of the robotic arm?
What are the benefits of using the Wheel and axle pulling mechanism ?
Building a robotic arm with two claws that close simultaneously is more difficult due to constraints in the model board material. Why?
STEP.7
Constructing the vehicle frame and wheels
製作機械手臂
Quiz 04
When positioning parts on the model board, it's recommended to leave some space between each part. Why ?
What are some tips for cutting circular wheels on the model board?
What role do bamboo skewers and straws typically play in the construction of remote-controlled cars?
Page updated
Google Sites
Report abuse